The Secret Society of Lathe Trolls

Steve E.

http://gadgets.qj.net/How-to-Pirate-a-Vinyl-Record/pg/49/aid/39381

I can't tell if this is a joke. Someone please try it and report. It's hilarious, anyway.

buckettovsissors · Joined: 17 May 2006 Posts: 56

this is no joke i succsessfully made a negative with really gooey wood glue ,the experment with normal white glue was not as succsessfull, but that was due to me not waiting untill it was compleatly dry,but i could defently tell that the wood glue works much better, kinda like a rubbery negative flexi.
my next project is to get a buckett of wood glue order one copy or a 7" send the recording in backwards and make a bunch of negaitve positives.
.theo
_________________
http://buckettovsissors.widerstand.org

Aussie0zborn · Joined: 11 Mar 2006 Posts: 82 Location: Australia

This is no joke, This is essentially how records are made. As an experiment, we once silvered a 12" vinyl record and electro-plated it to make a stamper. The edges were way too rough and after a few pressings, the stamper was unusable. So, it is possible to take a vinyl record and use it as a matrice. The vinyl record after all, is a replica of the master disc that was cut on lacquer.

buckettovsissors · Joined: 17 May 2006 Posts: 56

yea i made a few , they are more like antirecords but they are great, if I use a bunch of PVA then they are not as wavey, I also broke up some 45s from the flea market and fit them together carfully and then made a negative out of it, VERY antirecord ,but great , i just have to get a little better with the techniqie . Anyway there is a video of the needle bouncing here
www.produck.tk
_________________
http://buckettovsissors.widerstand.org

cementimental · Joined: 27 Jun 2005 Posts: 32

maybe hot glue from a gluegun would work?? Wouldn't have to wait so long to dry as pva...

you could maybe apply it in a spiral on the rotating record!? Or melt a load of it in a pan or somehting?? hmmm

Steve E. · Posted: Tue Jun 06, 2006 12:54 pm Post subject:

I guess I'm wondering if any records made from this mold actually play....and if they do, how good do they sound?

buckettovsissors · Joined: 17 May 2006 Posts: 56

the bouncy one in the video plays great Smile

naw really i made one that is flat, that doesnt bounce, but it has some bubbles that where really hard to remmove it kinda makes a lock groove effect in some parts thats with PVA , but I tried again with a cheap PVA and I applied some paper directly after putting the glue down and carfully rolled a glass over, worked pertty good execpt paper curls up , hahaha same bouncing needle effect! next i will use some cardboard ,should work better, and the cheap PVA wood glue was even transparent when it dryed. About sound well the first one with normal wood glue sounds pertty good, but not as good as the orginal, i think it lost some dynamics, but no hissing or whatever, good volume. I just got some mold silicon in the mail today, ill let you know the results,
_________________
http://buckettovsissors.widerstand.org

buckettovsissors · Joined: 17 May 2006 Posts: 56

oh yea,
hot glue wouldnt work cuz it trys way too hard then it will break
its way toooo brittle.
wood glue and normal glue isnt really too hard when it drys.
_________________
http://buckettovsissors.widerstand.org